EricBarger.me

Photography, writing, Apple tech, and more…

BV Precast
User Guide

Calculating the volume of the void left by a block-out or void former in a manhole side wall can be difficult. This calculator helps anyone solve this problem quickly and easily.

1. Select the inside diameter in inches of the manhole structure being used. The wall thickness automatically fills in when diameter is selected.
Stacks Image 248
2. Enter the concrete density in lb/ft3.
Stacks Image 250
3. Enter the diameter of the block-out(s).
Stacks Image 252
4. Enter up to four block-out diameters. For 8” sanitary pipe boots, a 12” block-out is normally used.

The result is the total volume of all block-outs entered. If the manhole being analyzed has four block-outs, the estimated volume represents the total volume of the four block-out diameters entered.

If the block-out is tapered, i.e. 30” diameter on the inside and 24” diameter on the outside, use the average of the two when solving for the volume. In this example, a 27” diameter block-out should be used.
[Back to the top]
Stacks Image 256
Support

Questions, comments, suggestions and general inquiries should be sent using the
contact form. Please include as much information as possible, so I can adequately address your email.
[Back to the top]
About

An iPhone App for the precast concrete industry. Possibly the first precast concrete industry specific app available for iOS devices (iPhone, iPad, and iPod Touch).
[Back to the top]
Contact
Contact me here through the web site.

Notice
EricBarger.me makes every attempt to ensure any advice or information contained in this website is accurate and correct. No liability of any kind including liability for negligence is accepted in this respect by EricBarger.me, its servants, affiliates or agents.